Marine, Motorhome, Solar, Immersion Heater 240v 1.5kW 11” x 2.1/4"bsp IMM150

Description

11" (275mm) immersed length, 2.1/4"bsp IMMERSION HEATER, 240v A.C. MAINS, 1.5kW (1500watts)
NOTE THAT 2.1/4"BSP THREAD ACTUALLY MEASURES 2.1/2" ACROSS. PLEASE VERIFY THAT THIS IS THE CORRECT THREAD SIZE AND THAT THE HEATER LENGTH IS CORRECT FOR YOUR SYSTEM BEFORE ORDERING (other threads and lengths available to order, eg 1.3/4"bsp which measures 2" across)
Pt.no. IMM150
DESIGNED FOR UNVENTED HOT WATER SYSTEMS
USING
HOT WATER STORAGE CALORIFERS,
AS FOUND IN BOATS, CARAVANS, CAMPERVANS, HORSEBOXES, CHALETS, etc.
ALLOWS PRODUCTION OF HOT WATER FROM A 240v SHORE LINE OR HOOKUP, OR AN ON-BOARD GENSET. THE LOW POWER ENABLES THE HEATER TO OPERATE FROM THE LIMITED POWER SUPPLY AVAILABLE WITH MANY LANDLINE OR SHORELINE HOOKUPS IN MARINAS, CAMPSITES etc .
THESE HEATERS WILL TYPICALLY BE INSERTED ACROSS THE DIAMETER OF THE TANK, LOW DOWN, NOT PLACED IN THE TOP OF THE TANK POINTING DOWNWARDS (SUCH HEATERS GENERALLY BEING MUCH LONGER LENGTH).
THESE IMMERSION HEATERS HAVE 'INCALOY 800' ELEMENTS, AND A DUAL THERMOSTAT WHICH IS A LEGAL REQUIREMENT ON UNVENTED SYSTEMS.
THE FIRST THERMOSTAT IS THE 'CONTROL' STAT (ADJUSTABLE), THE SECOND THERMOSTAT IS A 'SAFETY CUT OUT' WHICH TURNS OFF THE HEATER IN THE EVENT OF THE FIRST ONE FAILING AND CAUSING BOILING. IF THIS 2nd STAT OPERATES, IT STAYS OFF AND MUST BE MANUALLY RESET AFTER THE PROBLEM HAS BEEN RESOLVED.
STANDARD 2.1/4"BSP THREAD, FITS ALL OUR CALORIFER RANGE AND MANY OTHER DOMESTIC AND LEISURE VEHICLE CYLINDERS. COMPLETE WITH NEOPRENE 'O' RING SEAL.
SEE ALSO OUR LISTINGS FOR OTHER CALORIFIER ACCESORIES
weight - 700gms approx
Attention overseas buyers. Buyer is responsible for all import duties, fees, taxes.
DESIGNED FOR UNVENTED HOT WATER SYSTEMS USING HOT WATER STORAGE CALORIFERS, AS FOUND IN BOATS, CARAVANS, CAMPERVANS, HORSEBOXES, CHALETS, etc.   ALLOWS PRODUCTION OF HOT WATER FROM A 240v SHORE LINE OR HOOKUP, OR AN ON-BOARD GENSET. THE LOW POWER ENABLES THE HEATER TO OPERATE FROM THE LIMITED POWER SUPPLY AVAILABLE WITH MANY LANDLINE OR SHORELINE HOOKUPS IN MARINAS, CAMPSITES etc .   THESE IMMERSION HEATERS HAVE 'INCALOY 800' ELEMENTS, AND A DUAL THERMOSTAT WHICH IS A LEGAL REQUIREMENT ON UNVENTED SYSTEMS.  THE FIRST THERMOSTAT IS THE 'CONTROL' STAT (ADJUSTABLE), THE SECOND THERMOSTAT IS A 'SAFETY CUT OUT' WHICH TURNS OFF THE HEATER IN THE EVENT OF THE FIRST ONE FAILING AND CAUSING BOILING. IF THIS 2nd STAT OPERATES, IT STAYS OFF AND MUST BE MANUALLY RESET AFTER THE PROBLEM HAS BEEN RESOLV